Tunley Rod & Bar have held quality certificates for Stocking and Distribution of General Steel Sections with lot traceability since 1992. Although specialist in plain round mild steel and ribbed reinforcement steel we also carry a selection of other plain merchant bar and sections especially aimed at fencing manufacturers and fabricators. Our range includes, flat bar, square bar and E.R.W. steel tubing predominately to BS EN 10025 S275JR and S355JR qualities in nominal 6 meter stock lengths.
As a decoiler of small round rod we are an invaluable source of supply to other steel stockholders and larger manufacturers in the UK. We can supply small diameter rounds which can be difficult to source as none of the British steel mills roll below 12mm in straight length.
Typical sizes normally in stock include: Round Bar Decoiled material: 5.5mm, 6mm, 6.5mm, 8mm, 10mm & 12mm Hot Rolled bar: 16mm, 19mm, 20mm, 22mm, 24mm, 25mm, 30mm, 32mm, 40mm
30 x 5, 30 x 8, 30 x 10
40 x 8, 40 x 10, 40 x 12
50 x8, 50 x 10, 50 x 12
60 x 12
10mm, 12mm, 16mm, 20mm
19 x 1.5
Why not let us cut you steel to length for you? Many stockholders shy away from sawing small round bar round bar due to of high blade usage when bundle cutting. Here at Tunley Rod & Bar production saw cutting is our forte, because on many diameters we are able to utilise the back ends or off cuts we are very competitive on prices. On the smallest diameter round steels we straighten and cut direct from coil eliminating scrap and wastage completely. Specialist in plain round bar and reinforcing steel whether it be straight or bent, cropped or sawn make Tunley Rod & Bar (Decoilers) Ltd your first call!